DONUT command


The DONUT command is used to create a solid circle or a wide ring.

Command Access:

Ribbon : Home > Draw > Polyline > Donut
Menu : Draw > Donut
Command : DONUT

Command Prompts:

Specify inside diameter of donut <0.5000>:
Specify outside diameter of donut<1.000>:
Specify center of donut or:

Function Description:

The ring is composed by two arc polylines; they connect end to end and form a circle. The width of ring is determined by the inside diameter and outside diameter. To create a solid circle, users could specify the inside diameter to 0.

autocad donut command

The center of donut determines its location. After specifying diameter of donut, it will prompt to specify location of donut. Users could use FILL command to decide the current hatch style of donut.

autocad donut command center

 


Related tutorial video:

 

 

Above video sources from TUTORIAL - GETTING STARTED WITH GSTARCAD, enrol now for free.

 

 



Article ID: 2097
Created: August 12, 2021
Last Updated: April 14, 2022
Author: GstarCAD MY /KW

Online URL: https://kb.gstarcad.com.my/article/donut-command-2097.html