To Offset Objects

To Offset Objects

GstarCAD 2027 → Commands → Procedures

To Offset Objects by Specifying an Offset Distance

  1. Click Modify > Offset on the main menu.
  2. Specify the offset distance. You can either enter a value or use the pointing device to determine a distance with two points.
  3. Select an object to offset.
  4. Specify a point on side to offset.

To Offset Objects by Specifying a Pass-Through Point

  1. Click Modify > Offset on the main menu.
  2. Enter T (Through) at the command prompt.
  3. Select the object to offset.
  4. Specify the through point.

Original help · © Gstarsoft Co., Ltd.