MIRROR3D command

The MIRROR3D command is used to create mirrored copies of selected objects.

Command Access:

Ribbon : 3D > 3D Operations > 3D Mirror
Menu : Modify > 3D Operations > 3D Mirror
Command : MIRROR3D

Command Prompts:

Select object:
Specify first point of mirror plane (3 points) or [Object/Last/Zaxis/View/XY/YZ/ZX/3points]<3points>:
Specify second point of mirror plane:
Specify third point of mirror plane:
Delete source objects? [Yes/No]:

Relative Glossary:

Object:
Specify a mirroring plane by selecting a planar object.
The planar object could be a circle, an arc, or a 2D polyline segment.

Last : Mirror selected objects by the previously defined mirroring plane.
Z axis : Use one point on plane and another point on the normal of the plane to define mirror plane.

View : Align the mirroring plane to the current viewing plane and through a specified point.

XY/YZ/ZX: Select one point and define a plane contains the selected point and parallel with a standard plane (XY, YZ or ZX). The mirroring plane is aligned with the defined plane.

3points: Specify a mirror plane by 3 points. If selecting this option, it will not display the following prompt: Specify first point of mirror plane.