RECTANG Command — GstarCAD 2027
RECTANG Command
GstarCAD 2027 · Command Reference
Commands > R Command > RECTANG
Function Description:
This command is used to create a rectangular polyine.
Users can use this command to specify the rectangular parameters (length, width, and rotated angle) and control corner types (fillet, chamfer or right angle).
Command Access:
Icon:
Menu: Draw > Rectangle
Ribbon: Home > Draw > Rectangle
Toolbar: Draw > Rectangle
Command: RECTANG
Alias: REC
Command Prompts:
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width/Oblique]:
First corner point
Specifies a corner point of the rectangle.
- Other corner point: Specifies another corner point to create a rectangle.
- Area:
Creates a rectangle by the area and a length or a width. It can create chamfers or fillets on the rectangle by setting the
Chamfer or Fillet option.
- Dimensions:
Creates a rectangle by length and width.
- Rotation:
Creates a rectangle at a specified rotation angle.
Chamfer
Specifies the chamfer distances for the rectangle.
Elevation
Specifies the Z value for the rectangle. The default is 0.0.
Fillet
Specifies the fillet radius for the rectangle.
Thickness
Specifies the thickness of the rectangle.
Width
Specifies the polyline width for the rectangle.
Related References：
Related Tasks：