To Create Geometric Tolerances

GstarCAD 2027 · Command Reference

To Create Geometric Tolerances

1. Click Dimension > Tolerance on the main menu.
2. The Geometric Tolerance dialog box is displayed, click the first square under Sym and select a symbol to insert.
3. Under Tolerance 1, click the first black box to insert a diameter symbol.
4. In the Text box, enter the first tolerance value.
5. To add a material condition, click the second black box and click a symbol in the Material Condition dialog box to insert it.
6. Add a second tolerance value if necessary in the same way as the first tolerance value.
7. Under Datum 1, Datum 2, Datum 3, enter the datum reference value.
8. Click the black box to insert a material condition symbol for each datum reference.
9. In the Height box, enter a height.
10. Click the Projected Tolerance Zone box to insert the symbol.
11. In the Datum Identifier box, add a datum value.
12. Click OK.
13. Enter the tolerance location in the drawing area.

Other versions with matching text

2023 · 2024 · 2025 · 2026