3DPOLY Command — GstarCAD 2027
3DPOLY Command
GstarCAD 2027 · Command Reference
Commands > 3D Command > 3DPOLY
Function Description:
This command is used to create 3D polylines.
The 3D polyline is a sequence as a single object that combined by connected straight lines, these
lines can in different planes, but can not contain arc segments.
Command Access:
Icon:
Menu: Draw > 3D Polyline
Ribbon: Home > Draw > 3D Polyline
Toolbar: /
Command: 3DPOLY
Alias: /
Command Prompts:
Specify start point of polyline:
Specify endpoint of line or [Undo]:
Specify endpoint of line or [Undo]:
Specify endpoint of line or [Close/Undo]:
Endpoint
Draws a straight line from the start point to the specified point. It will not stop prompting until pressing ENTER.
Undo
Removes the last drawn straight line and redraws from the last point.
Close
Draws a line to close the 3D polyline from the end point to the start point and exits the command. To close the 3D polyline, there must be at least two line segments.
Related References：
Related Tasks：