3DPOLY Command — GstarCAD 2027

3DPOLY Command

GstarCAD 2027 · Command Reference

Commands > 3D Command > 3DPOLY

Function Description:

This command is used to create 3D polylines.
The 3D polyline is a sequence as a single object that combined by connected straight lines, these lines can in different planes, but can not contain arc segments.

Command Access:

Icon:
Menu: Draw > 3D Polyline
Ribbon: Home > Draw > 3D Polyline
Toolbar: /
Command: 3DPOLY
Alias: /

Command Prompts:

Specify start point of polyline:

Specify endpoint of line or [Undo]:
Specify endpoint of line or [Undo]:
Specify endpoint of line or [Close/Undo]:

Endpoint

Draws a straight line from the start point to the specified point. It will not stop prompting until pressing ENTER.

Undo

Removes the last drawn straight line and redraws from the last point.

Close

Draws a line to close the 3D polyline from the end point to the start point and exits the command. To close the 3D polyline, there must be at least two line segments.

Related References：

• Commands about Curved Objects

Related Tasks：

• To Draw Polylines

Other versions with matching text

2023 · 2024 · 2025 · 2026

Article ID: 3052
Created: September 26, 2026
Last Updated: September 25, 2026
Author: kbadmin

Online URL: https://kb.gstarcad.com.my/article/3dpoly-command-gstarcad-2027-3052.html