Cloud Line
Cloud Line
GstarCAD 2021 → User Guide → Express tool → Draw
Cloud Line
Creates polyline objects comprised of arcs that resemble cloud lines.
Menu: Express tools>Draw>Cloud Line
Command Entry: REVCLOUD
Once the command is started, the command line prompts as follows:
Minimum arc length:Current Maximum arc length: Current Style: Normal
Specify start point or [Arc length/Object/Style]<Object>: Specify a point or enter an option or press ENTER
Starting point: Specifies the starting point of the cloud lines.
Guide crosshairs along cloud path…
Once the first arc links to the last arc, the prompts are displayed as follows:
Reverse direction [Yes (Y)/No (N)]: By inputting "Y", all the arcs will change into an inverse position. By inputting "N", the arcs will keep the current position.
Arc: Specifies the arc length.
Specify minimum length of arc <current>: Specify the arc length value or press ENTER
Specify the maximum arc length <current>: Specify the arc length value or press ENTER
Then specify start and end point to finish the operation.
Note: The maximum arc length should not be greater than 3 times the minimum arc length. The value of arc length is stored in the register.
Object: Converts the closed object to the cloud lines. It can only be applied to the closed object.
Select objects: Select a closed object(s)
Reverse direction [Yes (Y)/No (N)]: By inputting "Y", all the arcs will change into an inverse position. By inputting "N", the arcs will keep the current position. Select any option and press Enter to finish the operation.
Style: There are two styles: Normal (same as above) and Calligraphy, which makes the arcs of the cloud thicker than the normal one.
Select arc style [Normal/Calligraphy]<Normal>: Select Calligraphic
Reverse direction [Yes (Y)/No (N)]: By inputting "Y", all the arcs will change into an inverse position. By inputting "N", the arcs will keep the current position. Select any option and press Enter to finish the operation.
Gstarsoft Co.,Ltd