GstarCAD 2026 · Command Reference
Function Description:
The FACETRATIO system variable is used to set the width and height ratio of faceting for cylinder and cone solids.
| Type | Integer |
| Saved in | Not saved |
| Initial value | 0 |
| Range | 0,1 |
System Variable Value:
0: create N x 1 meshes for cylinder and cone solids
1: create N x M meshes for cylinder and cone solids
Setting the FACETRATIO to be 1, increase mesh density and improve the quality of render model and shaded models.
The faceting is visible only in the 2D Wireframe visual style.
Article ID: 9157
Created: October 6, 2026
Last Updated: September 26, 2026
Author: kbadmin
Online URL: https://kb.gstarcad.com.my/article/facetratio-system-variable-gstarcad-2026-9157.html