User Guide > Create and Modify Objects > Create and Use Blocks > Dynamic Blocks > Example Of Dynamic Operation > Point Movement
1. Draw a drawing
Draw a drawing like below, define as a block.
2. Add point parameter
Click the Point parameter on the Parameters panel, define the parameter position according to the command prompt, as shown in below picture.
3. Add move action
Click the Move action button on the Action panel, match the parameter and the object for the action, and define the position, as shown in below picture.
The position of action label does not affect the effect of the dynamic block, however, for the sake of beauty\& convenience, try to put the label near the related parameter.
4. Test dynamic block
Insert the dynamic block, drag the blue grip, then move the keyway to the right accordingly, as shown in below picture. Obviously, the dynamic block can achieve the expected results.
2022 · 2023 · 2024 · 2025 · 2027
Article ID: 8156
Created: October 6, 2026
Last Updated: September 26, 2026
Author: kbadmin
Online URL: https://kb.gstarcad.com.my/article/point-movement-gstarcad-2026-8156.html