To Work With Chamfers — GstarCAD 2027

To Work With Chamfers

GstarCAD 2027 · Command Reference

To Create a Chamfer Defined by a Length and an Angle

  1. Click Modify > Chamfer on the main menu.
  2. Enter A at the command prompt.
  3. Specify the chamfer length on the first line.
  4. Specify a chamfer angle from the first line.
  5. Enter E (mEthod) and then enter A (Angle).
  6. Select the first line.
  7. Select the second line or shift-select to apply corner. Note: If the second line segment selected isn't adjacent to the first line segment, the line segments between the selected segments are removed and replaced with the chamfer.

To Create a Chamfer Defined by Two Distances

  1. Click Modify > Chamfer on the main menu.
  2. Enter D at the command prompt.
  3. Specify the first chamfer distance.
  4. Specify the second chamfer distance.
  5. Select the first line.
  6. Select the second line or shift-select to apply corner.

To Chamfer All Line Segments in a 2D Polyline

  1. Click Modify > Chamfer on the main menu.
  2. Enter P (Polyline) at the command prompt.
  3. Select a 2D polyline or enter an option that defines the size of the chamfer.
  4. If you enter an option, provide the value for the option and then select a 2D polyline.

Other versions with matching text

2023 · 2024 · 2025 · 2026


Article ID: 6344
Created: September 26, 2026
Last Updated: September 26, 2026
Author: kbadmin

Online URL: https://kb.gstarcad.com.my/article/to-work-with-chamfers-gstarcad-2027-6344.html