To Draw a Rectangle — GstarCAD 2027

To Draw a Rectangle

GstarCAD 2027 · Command Reference

To Draw a Rectangle

  1. Click Draw > Rectangle on the main menu.
  2. Specify the first corner point.
  3. Specify the other corner point.

To Draw a Rectangle By Length and Width

  1. Click Draw > Rectangle on the main menu.
  2. Specify the first corner point.
  3. Enter D (Dimensions) at the command prompt.
  4. Specify the length for rectangles.
  5. Specify the width for rectangles.
  6. Specify other corner point

To Draw a Rectangle By Area

  1. Click Draw > Rectangle on the main menu.
  2. Specify the first corner point.
  3. Enter A (Area) at the command prompt.
  4. Enter the area of the rectangle in current units.
  5. Enter L to enter the length. The width is calculated based on the length and the area. You can either enter W to enter the width. The length is calculated based on the width and the area.
  6. Enter the rectangle length or width.

To Draw a Rectangle With Rotation

  1. Click Draw > Rectangle on the main menu.
  2. Specify the first corner point.
  3. Enter R (Rotation) at the command prompt.
  4. Specify a rotation angle.
  5. Specify the other corner point.

Other versions with matching text

2023 · 2024 · 2025 · 2026


Article ID: 6210
Created: September 26, 2026
Last Updated: September 26, 2026
Author: kbadmin

Online URL: https://kb.gstarcad.com.my/article/to-draw-a-rectangle-gstarcad-2027-6210.html