GstarCAD 2027 · Command Reference
Function Description:
The TRIMMODE system variable is used to control whether to trim selected edges for fillet and chamfer.
| Type | Integer |
| Saved in | Registry |
| Initial value | 1 |
| Range | 0,1 |
System Variable Value:
0: do not trim selected edges
1: trim the selected edge to endpoints of chamfer lines and fillet arcs
Article ID: 6068
Created: September 26, 2026
Last Updated: September 26, 2026
Author: kbadmin
Online URL: https://kb.gstarcad.com.my/article/trimmode-system-variable-gstarcad-2027-6068.html