GstarCAD 2027 · Command Reference
Function Description:
The SPLINESEGS system variable is used to control the generated segment number for each spline-fit polyline which generated by Spline option of PEDIT command.
| Type | Integer |
| Saved in | Drawing |
| Initial value | 8 |
| Range | -32768 \~ 32767 |
Specifying it to be a negative value, it will use the absolute value of settings to generate segments, and then a fit-type curve is applied to those segments. The arc will be used as approximating segments for fit-type curves. If the specified number of segments is smaller, the arcs generated curves will be much smoother, but it may take a long time to generate curves.
Article ID: 5953
Created: September 26, 2026
Last Updated: September 26, 2026
Author: kbadmin
Online URL: https://kb.gstarcad.com.my/article/splinesegs-system-variable-gstarcad-2027-5953.html