GstarCAD 2027 · Command Reference
Function Description:
The LOFTANG1 system variable is used to set the draft angle through the first cross section in the loft operation.
| Type | Real |
| Saved in | Drawing |
| Initial value | 90 |
| Range | 0 \~ 360 |
The 0 direction is measured outward from the curve on the plane of the curve. The positive direction is measured toward the next cross section.
Article ID: 5676
Created: September 26, 2026
Last Updated: September 26, 2026
Author: kbadmin
Online URL: https://kb.gstarcad.com.my/article/loftang1-system-variable-gstarcad-2027-5676.html