GstarCAD 2027 · Command Reference
Function Description:
The HPDRAWORDER system variable is used to control the order of hatches and fills.
| Type | Integer |
| Saved in | Not saved |
| Initial value | 3 |
| Range | 0,1,2,3,4 |
The HPDRAWORDER system variable can control whether the hatches and fills are display in front of other objects or behind them; or display in front of associative boundary or behind them.
System Variable Value:
0: none, do not specify draw order for hatches and fills
1: send to back. Send the hatches and fills back of other objects
2: bring to front. Bring the hatches and fills in front of other objects
3: send behind of boundary. Send the hatches and fills behind of boundary objects
4: bring in front of boundary. Bring the hatches and fills in front of boundary objects
Article ID: 5606
Created: September 26, 2026
Last Updated: September 26, 2026
Author: kbadmin
Online URL: https://kb.gstarcad.com.my/article/hpdraworder-system-variable-gstarcad-2027-5606.html