GstarCAD 2027 · Command Reference
Function Description:
The HPDOUBLE system variable is used to specify double hatch patterns for custom defined patterns.
| Type | Integer |
| Saved in | Not saved |
| Initial value | 0 |
| Range | 0,1 |
The double hatch pattern specifies a second set of lines drawn at 90 degrees with original line.
System Variable Value:
0: turn off double hatch pattern
1: turn on double hatch pattern
Article ID: 5605
Created: September 26, 2026
Last Updated: September 26, 2026
Author: kbadmin
Online URL: https://kb.gstarcad.com.my/article/hpdouble-system-variable-gstarcad-2027-5605.html