GstarCAD 2027 · Command Reference
Function Description:
The DGNOSNAP system variable is used to determine whether to active object snap mode for geometric drawings that attached DGN reference underlay.
| Type | Integer |
| Saved in | Registry |
| Initial value | 1 |
| Range | 0,1 |
System Variable Value:
0: turn off object snap mode for geometric drawings that attached DGN reference underlay
1: turn on object snap mode for geometric drawings that attached DGN reference underlay
Article ID: 5317
Created: September 26, 2026
Last Updated: September 25, 2026
Author: kbadmin
Online URL: https://kb.gstarcad.com.my/article/dgnosnap-system-variable-gstarcad-2027-5317.html