GstarCAD 2027 · Command Reference
Alignment Parameter can give dynamic blocks the function of alignment automatically, which can save the step of rotating the blocks.
1.Add a alignment parameter for a roughness symbol
Draw a roughness symbol in the Block Editor. Select the icon of the alignment parameter. Specify the location and the aligned orientation of the parameter following what the computer asked as shown in the picture below, the dotted line is the align orientation.
2.Test the dynamic block
Insert the roughness dynamic block, move the align grips, the symbol will align with the interface of the dimensions, as shown in the picture below.
Article ID: 5035
Created: September 26, 2026
Last Updated: September 25, 2026
Author: kbadmin
Online URL: https://kb.gstarcad.com.my/article/alignment-gstarcad-2027-5035.html