GstarCAD 2027 · Command Reference
Function Description:
The AUNITS system variable is used to set angle units.
| Type | Integer |
| Saved in | Drawing |
| Initial value | 0 |
| Range | 0 \~ 4 |
System Variable Value:
0: decimal degrees 1: degrees / minutes /seconds 2: gradian 3: radians 4: surveyor's units
Article ID: 4980
Created: September 26, 2026
Last Updated: September 25, 2026
Author: kbadmin
Online URL: https://kb.gstarcad.com.my/article/aunits-system-variables-gstarcad-2027-4980.html