GstarCAD 2027 · Command Reference
Function Description:
The ANGDIR system variable is used to set the direction of positive angle.It is measures from angle 0 relative to the orientation of current UCS.
| Type | Integer |
| Saved in | Drawing |
| Initial value | 0 |
| Range | 0,1 |
System Variable Value:
0: anticlockwise
1: clockwise
Article ID: 4966
Created: September 26, 2026
Last Updated: September 25, 2026
Author: kbadmin
Online URL: https://kb.gstarcad.com.my/article/angdir-system-variable-gstarcad-2027-4966.html