GstarCAD 2027 · System Variables
System Variables > D System Variables > DWGCHECK
Function Description:
The DWGCHECK system variable is used to check whether there exists potential problem when opening drawings.
| Type | Integer |
| Saved in | Registry |
| Initial value | 1 |
| Range | 0,1,2,3 |
System Variable Value:
0: if a drawing that you try to open has a potential problem, you are warned before the drawing is opened
1: if a drawing that you try to open has a potential problem, or if it was saved by an application other than one based on RealDWG, you are warned before the drawing is opened
2: if a drawing that you try to open has a potential problem, you are notified at the Command prompt
3: if a drawing that you try to open has a potential problem, you are notified at the Command prompt. If the drawing has a potential problem and the drawing was saved by an application other than one based on RealDWG, you are warned before the drawing is opened
2016 · 2017 · 2018 · 2019 · 2020 · 2021 · 2022 · 2023 · 2024 · 2025 · 2026
Article ID: 4768
Created: September 26, 2026
Last Updated: September 25, 2026
Author: kbadmin
Online URL: https://kb.gstarcad.com.my/article/dwgcheck-system-variable-gstarcad-2027-4768.html