DIMBASELINE Command — GstarCAD 2027

DIMBASELINE Command

GstarCAD 2027 · Command Reference

Commands > D Command > DIMBASELINE

Function Description:

This command is used to create a linear, angular or coordinate dimension from the baseline of the previous or selected dimension. The default spacing between baseline dimensions can be set from the Lines tab of the Dimension Style Manager dialog box (DIMDLI system variable).
If no dimension is created in the current session, you are prompted to select a linear, ordinate or angular dimension to use as the base for the baseline dimension. To end the command, press Enter twice or press Esc. The current dimension style determines the appearance of the text.
By default, the dimension style of the baseline dimension is inherited from the previous or selected dimension. You can use DIMCONTINUEMODE to change the default to use the current dimension style.

Command Access:

Icon:
Menu: Dimension > Baseline
Ribbon: Annotation > Dimension > DIMBASELINE
Toolbar: Dimension > DIMBASELINE
Command: DIMBASELINE
Alias: DIMBASE/DBA

Command Prompts:

Select base dimension:
Specify a second extension line origin or [Undo/Select] \<Select>:

Select base dimension

Specifies a linear, ordinate or angular dimension. Otherwise, the program skips this prompt and uses the dimension object that was last created in the current session.

Second extension line origin

If the base dimension is linear or angular, this prompt is displayed. By default, the first extension line of the base dimension is used as the extension line origin for the baseline dimension. To override this default behavior, explicitly select the base dimension; the extension line origin becomes the extension line of the base dimension closest to the pick point of the selection. When you select a second point, the baseline dimension is drawn and the Specify a Second Extension Line Origin prompt is redisplayed. To end the command,  press Esc. To select another linear, ordinate or angular dimension to use as the basis for the baseline dimension, press Enter.

Feature location

If the base dimension is ordinate, this prompt is displayed. Uses the endpoint of the base dimension as the endpoint for the baseline dimension; you are prompted for the next feature location. When you select a feature location, the baseline dimension is drawn and the Specify Feature Location prompt is redisplayed. To select another linear, ordinate or angular dimension to use as the basis for the baseline dimension, press Enter.

Undo

Undoes the last baseline dimension entered during this command session.

Select

Prompts you to select a linear, ordinate or angular dimension to use as the base for the baseline dimension.

Related References：

• Commands about Linear Dimensions
• Commands about Angular Dimensions
• Commands about Baseline and Continued Dimensions

Related Concepts：

• About the Types of Dimensions

Related Tasks：

• To Create Linear Dimensions
• To Create Radial Dimensions
• To Create Angular Dimensions
• To Create Arc Length Dimensions

Other versions with matching text

2023 · 2024 · 2025 · 2026

Article ID: 4350
Created: September 26, 2026
Last Updated: September 25, 2026
Author: kbadmin

Online URL: https://kb.gstarcad.com.my/article/dimbaseline-command-gstarcad-2027-4350.html