CYLINDER Command — GstarCAD 2027

CYLINDER Command

GstarCAD 2027 · Command Reference

Commands > C Command > CYLINDER

Function Description:

This command is used to create 3D solid cylinders. During a drawing session, the default value for the base radius is always the previously entered base radius value.

Command Access:

Icon:
Menu: Draw > Modeling > Cylinder
Ribbon: 3D > Modeling > Cylinder
Toolbar: Modeling > Cylinder
Command: CYLINDER
Alias: CYL

Command Prompts:

Specify center point of base or [3P/2P/Ttr/Elliptical]:
Specify radius of bottom or [Diameter]:
Specify height or [2P/Axis endpoint]:

3P

Specifies the cylinder base by 3 points.

• 2p:
  Specifies the cylinder height by 2 points, the distance of 2 points determines cylinder height.
• Axis endpoint:
  Specifies the endpoint of cylinder axis. The axis endpoint can be center point of top plane; as well it can be any place in 3D space. The axis endpoint defines the length and direction of the cylinder.

2P

Specifies cylinder base radius by 2 points.

Ttr

Defines cylinder base by specified radius and two tangent objects.
There may be many objects satisfy specified conditions. It will create cylinder base by specified radius and points of tangency that are nearest to the selected point.

Elliptical

Specifies an ellipse base for a cylinder.

• Center:
  Creates an ellipse base by center point.

Diameter

Specify the diameter of cylinder base.

Related References：

• Commands about Working with 3D Models
• Commands about Creating 3D Solids

Related Tasks：

• To Create Cylinders

Other versions with matching text

2023 · 2024 · 2025 · 2026

Article ID: 4234
Created: September 26, 2026
Last Updated: September 25, 2026
Author: kbadmin

Online URL: https://kb.gstarcad.com.my/article/cylinder-command-gstarcad-2027-4234.html