SWEEP Command — GstarCAD 2027

SWEEP Command

GstarCAD 2027 · Command Reference

Commands > S Command > SWEEP

Function Description:

This command is used to create a 3D solid or surface by sweeping a 2D object, 3D object or subobject.
Users can create a solid or surface by sweeping closed or open surface (planar or non-planar) along a closed or open path. They can select open surface to create another surface and select closed surface to create solid or another surface (depending on specified mode).

The following objects can be used to sweep: 2D or 3D splines, 2D polylines, 2D solids, edge subobjects of 3D solid, arcs, circles, ellipses, elliptical arcs, lines, regions, solids, edge subobjects of solid, surfaces and meshes, wide lines. The following objects can be used as a sweep path: 2D or 3D splines, 2D or 3D polylines, edge subobjects of 3D solid, helixes, arcs, circles, ellipses, elliptical arcs, lines.

Command Access:

Icon:
Menu: Draw > Modeling > Sweep
Ribbon: 3D > Modeling > Extrude > Sweep
Toolbar: Modeling > Sweep
Command: SWEEP
Alias: /

Command Prompts:

Select objects to sweep or [MOde]:

Related References：

• Commands about Constructing 3D Solids and Surfaces from 2D Geometry
• Commands about Creating Procedural Surfaces
• Commands about Working with 3D Models

Related Tasks：

• To Create a Solid by Sweeping an Object Along a Path
• To Create a Surface by Sweeping an Object Along a Path

Other versions with matching text

2023 · 2024 · 2025 · 2026

Article ID: 4099
Created: September 26, 2026
Last Updated: September 25, 2026
Author: kbadmin

Online URL: https://kb.gstarcad.com.my/article/sweep-command-gstarcad-2027-4099.html