SOLID Command — GstarCAD 2027

SOLID Command

GstarCAD 2027 · Command Reference

Commands > S Command > SOLID

Function Description:

This command is used to create solids filled triangles and quadrilaterals.
The selected 2D solids must be orthogonal with the viewing direction and the FILLMODE system variable must be set to 1, otherwise the solid can not be hatched.

Command Access:

Icon:
Menu: Draw > Modeling > Meshes > 2D Solid
Ribbon: 3D > Mesh > 2D Solid
Toolbar: /
Command: SOLID
Alias: SO

Command Prompts:

Specify first point:
Specify second point:
Specify third point:
Specify fourth point or \<exit>:

First point

Specifies the first point in the 2D solid.

Second point

Specifies the first edge in the 2D solid.

Third point

Sets the corner point relative to the second point.

Fourth point or \<exit>

Sets the fourth point relative to the first point. Pressing Enter under the command prompt of specify fourth point or \<exit> exit, it creates a filled triangle.

Users can continue to specify the third point and the fourth point to create more triangles and quadrilaterals.

Related References：

• Commands about Hatches and Gradients

Related Tasks：

• To Hatch or Fill an Object or an Area
• To Create an Unbounded Hatch

Other versions with matching text

2023 · 2024 · 2025 · 2026

Article ID: 4076
Created: September 26, 2026
Last Updated: September 25, 2026
Author: kbadmin

Online URL: https://kb.gstarcad.com.my/article/solid-command-gstarcad-2027-4076.html