SNAP Command — GstarCAD 2027

SNAP Command

Commands > S Command > SNAP

Function Description:

This command is used to limit the cursor moving space.

Command Access:

Icon: /
Menu: /
Ribbon: /
Toolbar: /
Command: SNAP
Alias: SN

Command Prompts:

Specify snap spacing or [ON/OFF/Aspect/Style/Type] \<10.0000>:

Activates Snap mode by setting a specified value.

Turns on grid Snap mode by using the current settings.

Turns off Snap mode, but retains the current settings.

Specifies horizontal spacing and vertical spacing.

Specifies snap grid style of Standard or Isometric.

Standard: Specifies snap grid that is parallel to the XY plane of the current UCS. The X and Y space can be unequal.
Snap spacing: Specifies snap space of all snap grids.
Aspect: Specifies the horizontal and vertical spacing separately.
Isometric: Specifies an isometric snap grid at the original snap location of 30°and 150°. The horizontal and vertical spacing of isometric snap should be equal. The lined grid can not snap in isometric snap grid. The ISOPLANE system variable can determine the cursor types. They may be Top Isometric Plane (angle of 30°and 150°), the Left Isometric Plane (angle of 90°and 150°) or the Right Isometric Plane (angle of 30°and 90°).

Specifies the snap type: Polar or Grid Snap. It can also be controlled by the SNAPTYPE system variable.

Polar: Specifies the polar snap tracking distance. (It can also be controlled by the POLARANG system variable.)
Grid: Specifies the snap mode to grid snap, then the cursor snaps objects along horizontal or vertical direction.

Related References：

Related Tasks：

Article ID: 4074
Created: September 26, 2026
Last Updated: September 25, 2026
Author: kbadmin

Online URL: https://kb.gstarcad.com.my/article/snap-command-gstarcad-2027-4074.html