TRACE Command — GstarCAD 2027

TRACE Command

GstarCAD 2027 · Command Reference

Commands > T Command > TRACE

Function Description:

This command is used to create a solid line.
The endpoint of the solid wide line is on the center line and it is always cut into rectangle. It automatically calculates the proper chamfer of adjacent lines. Specifying next point or pressing Enter, it creates next segments. According to the dispose of chamfer, there is no Undo option in TRACE command.
If you specify the FILL mode to ON, the wide line is solid, if you specify the FILL mode to OFF, the wide line only displays its profile.

Command Access:

Icon: /
Menu: /
Ribbon: /
Toolbar: /
Command: TRACE
Alias: /

Command Prompts:

Specify trace width \<1.0000>:

Specify start point:
Specify next point:

Other versions with matching text

2022 · 2023 · 2024 · 2025 · 2026

Article ID: 3491
Created: September 26, 2026
Last Updated: September 25, 2026
Author: kbadmin

Online URL: https://kb.gstarcad.com.my/article/trace-command-gstarcad-2027-3491.html