Function Description:
The LOFTANG1 system variable is used to set the draft angle through the first cross section in the loft operation.
Type : Real
Saved in : Drawing
Initial value : 90
Range : 0 ~ 360
The 0 direction is measured outward from the curve on the plane of the curve. The positive direction is measured toward the next cross section.
Article ID: 1674
Created: July 19, 2021
Last Updated: July 19, 2021
Author: GstarCAD MY /KW
Online URL: https://kb.gstarcad.com.my/article/loftang1-system-variable-1674.html