Function Description:
The HPDOUBLE system variable is used to specify double hatch patterns for custom defined patterns.
Type : Integer
Saved in : Not saved
Initial value : 0
Range : 0,1
The double hatch pattern specifies a second set of lines drawn at 90 degrees with original line.
System Variable Value:
0 : turn off double hatch pattern
1 : turn on double hatch pattern
Article ID: 1617
Created: July 16, 2021
Last Updated: July 16, 2021
Author: GstarCAD MY /KW
Online URL: https://kb.gstarcad.com.my/article/hpdouble-system-variable-1617.html