Rotate Cursors

The cursor can rotate anti-clockwise by 0 degree or 45 degree.

Menu : Express > GstarCAD Tools > Rotate Cursor > 0 or 45
Command Entry : RTCUR0/RTCUR45 (0 degree/45 degree)

Side Line

Menu : Express >GstarCAD Tools > Rotate Cursor > Side Line
Command Entry :RTCUR1

Operation steps:

1.Start the command.

2.Select the reference segment and system will align the X axis of the cursor to the selected segment.

Real Time Rotate

Menu : Express > GstarCAD Tools > Rotate Cursor > Real Time Rotate
Command Entry : RTCUR

Operation steps:

1.After executing the command, the command line prompts as below.

2.You can use the AWSD four keys to control the cursor direction until you are satisfied and press enter.

Article ID: 1050
Created: April 1, 2016
Last Updated: June 30, 2021
Author: kbadmin

Online URL: https://kb.gstarcad.com.my/article/rotate-cursors-1050.html