To Work With Arcs

GstarCAD 2027 · Command Reference

To Draw an Arc by Specifying Three Points

1. Click Draw > Arc > 3 Points on the main menu.
2. Specify the start point of the arc.
3. Specify the second point of the arc.
4. Specify the end point of the arc.

To Draw an Arc Using a Start Point, a Center Point, and an Endpoint

1. Click Draw > Arc > Start, Center, End on the main menu.
2. Specify the start point of the arc.
3. Specify the center point of the arc.
4. Specify the end point of the arc.

To Continue an Arc with a Tangential Line

1. Complete the arc.
2. Click Draw > Line on the main menu.
3. Press Enter at the first prompt.
4. Enter the length of the line and press Enter.

To Continue an Arc with a Tangential Arc

1. Complete the arc.
2. Click Draw > Arc > Continue on the main menu.
3. Specify the end point of the arc.

Other versions with matching text

2023 · 2024 · 2025 · 2026