Rotate Cursor — GstarCAD 2027
Rotate Cursor
GstarCAD 2027 · Command Reference
The cursor can rotate anti-clockwise by 0 degree or 45 degree.
Side Line
Command Entry:RTCUR1
Operation Steps:
1.Start the command.
2.Select the reference segment and system will align the X axis of the cursor to the selected segment.
Real Time Rotate
Command Entry:RTCUR
Operation Steps:
1.After executing the command, the command line prompts as below.
2.You can use the AWSD four keys to control the cursor direction until you are satisfied and press enter.