IMPLIEDFACE System Variable — GstarCAD 2027
IMPLIEDFACE System Variable
GstarCAD 2027 · Command Reference
Function Description:
The IMPLIEDFACE system variable is used to control the detection of implied faces.
| Type | Integer |
| Saved in | Registry |
| Initial value | 1 |
| Range | 0,1 |
System Variable Value:
0: implied faces can not be detected
1: implied faces can be detected
The implied face is a closed region, it can be created by intersected overlapped faces of 3D solids.
This variable must be set to 1 if you want to select and modify implied faces.