# Rotate Cursors [GstarCAD 2027](Help%20System/GSTARCAD/2027/Index.md) → [User Guide](Help%20System/GSTARCAD/2027/User%20Guide/(User%20Guide).md) → [Express Tools](Help%20System/GSTARCAD/2027/User%20Guide/Express%20Tools/(Express%20Tools).md) → [GstarCAD Tools](Help%20System/GSTARCAD/2027/User%20Guide/Express%20Tools/GstarCAD%20Tools/(GstarCAD%20Tools).md) The cursor can rotate anti-clockwise by 0 degree or 45 degree. ## **Side Line** **Command Entry:RTCUR1** ## Operation steps: 1. Start the command. 2. Select the reference segment and system will align the X axis of the cursor to the selected segment. ### **Real Time Rotate** **Command Entry:RTCUR** ## Operation steps: 1. After executing the command, the command line prompts as below. ![](Help%20System/GSTARCAD/2027/assets/013225332f15458e7adcf820dbbb00cb3068c417c9ccaf60260caeb2ac867c95.jpg) 2. You can use the AWSD four keys to control the cursor direction until you are satisfied and press enter. --- [Original help](https://www.gstarcad.net/help/GstarCAD_2027_en-US/detail/GUG_ET_GstarCADTools/Rotate%20Cursors.html) · © Gstarsoft Co., Ltd.