# HPORIGINMODE System Variable [GstarCAD 2027](Help%20System/GSTARCAD/2027/Index.md) → [System Variables](Help%20System/GSTARCAD/2027/System%20Variables/(System%20Variables).md) → [H](Help%20System/GSTARCAD/2027/System%20Variables/H/(H).md) ## Function Description: The HPORIGINMODE system variable is used to control how the default hatch origin is specified. | | | | --- | --- | | Type | Integer | | Saved in | Registry | | Initial value | 0 | | Range | 0,1,2,3,4,5 | ## System Variable Value: **0:** set by HPORIGIN **1:** use the left-bottom corner of rectangular extents of the hatch boundaries **2:** use the left-bottom corner of rectangular extents of the hatch boundaries **3:** use the right-top corner of rectangular extents of the hatch boundaries **4:** use the left-top corner of rectangular extents of the hatch boundaries **5:** use the center of rectangular extents of the hatch boundaries --- [Original help](https://www.gstarcad.net/help/GstarCAD_2027_en-US/detail/systemVariables_Hgsv/HPORIGINMODE.html) · © Gstarsoft Co., Ltd.