# RECTANG Command [GstarCAD 2027](Help%20System/GSTARCAD/2027/Index.md) → [Commands](Help%20System/GSTARCAD/2027/Commands/(Commands).md) → [R](Help%20System/GSTARCAD/2027/Commands/R/(R).md) ## Function Description: This command is used to create a rectangular polyine. Users can use this command to specify the rectangular parameters (length, width, and rotated angle) and control corner types (fillet, chamfer or right angle). ## Command Access: > **Icon:**  > **Menu:** Draw > Rectangle > **Ribbon:** Home > Draw > Rectangle > **Toolbar:** Draw > Rectangle > **Command:** RECTANG > **Alias:** REC ## Command Prompts: ``` Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width/Oblique]: ``` ## **First corner point** Specifies a corner point of the rectangle. - **Other corner point:** Specifies another corner point to create a rectangle.  - **Area:** Creates a rectangle by the area and a length or a width. It can create chamfers or fillets on the rectangle by setting the Chamfer or Fillet option.  - **Dimensions:** Creates a rectangle by length and width. - **Rotation:** Creates a rectangle at a specified rotation angle.  ## **Chamfer** Specifies the chamfer distances for the rectangle. ## **Elevation** Specifies the Z value for the rectangle. The default is 0.0. ## **Fillet** Specifies the fillet radius for the rectangle. ## **Thickness** Specifies the thickness of the rectangle. ## **Width** Specifies the polyline width for the rectangle.  --- **Related References：** - [Commands about Linear Geometric Objects (GstarCAD 2026)](../../../2026/Commands/00%20Command%20Groups/Commands%20about%20Linear%20Geometric%20Objects.md) **Related Tasks：** - [To Draw a Rectangle (GstarCAD 2026)](../../../2026/Commands/01%20Procedures/To%20Draw%20a%20Rectangle.md) - [To Draw Polylines (GstarCAD 2026)](../../../2026/Commands/01%20Procedures/To%20Draw%20Polylines.md) --- [Original help](https://www.gstarcad.net/help/GstarCAD_2027_en-US/detail/commandReferences_R/RECTANG.html) · © Gstarsoft Co., Ltd.