# DIMJOGLINE Command [GstarCAD 2027](Help%20System/GSTARCAD/2027/Index.md) → [Commands](Help%20System/GSTARCAD/2027/Commands/(Commands).md) → [D](Help%20System/GSTARCAD/2027/Commands/D/(D).md) ## Function Description: This command is used to add or remove a jog line in a linear or aligned dimension. The jog line means a break in a dimensioned object. The jogged dimension value represents the actual distance of the object, rather than the distance measured in the drawing. ## Command Access: > **Icon:**  > **Menu:** Dimension > Jogged Linear > **Ribbon:** Annotation > Dimension > DIMJOGLINE > **Toolbar:** Dimension > Jogged Linear > **Command:** DIMJOGLINE > **Alias:** / ## Command Prompts: ``` Select dimension to add jog or [Remove]: ```  ## **Select dimension to add jog** Specifies the linear or aligned dimension to add a jog. You are prompted to Specify the jog location. Users can press ENTER to place the jog at the midpoint between the dimension text and the first extension line or place the jog at the midpoint of the dimension line that based on the location of the dimension text. ## **Select dimension to remove jog** Removes a jog from the specified linear or aligned dimension. --- **Related References：** - [Commands about Jogged Linear Dimensions (GstarCAD 2026)](../../../2026/Commands/00%20Command%20Groups/Commands%20about%20Jogged%20Linear%20Dimensions.md) **Related Tasks：** - [To Work with Jogged Linear Dimensions (GstarCAD 2026)](../../../2026/Commands/01%20Procedures/To%20Work%20with%20Jogged%20Linear%20Dimensions.md) --- [Original help](https://www.gstarcad.net/help/GstarCAD_2027_en-US/detail/commandReferences_D/DIMJOGLINE.html) · © Gstarsoft Co., Ltd.