# CHAMFEREDGE Command
[GstarCAD 2027](Help%20System/GSTARCAD/2027/Index.md) → [Commands](Help%20System/GSTARCAD/2027/Commands/(Commands).md) → [C](Help%20System/GSTARCAD/2027/Commands/C/(C).md)
## Function Description:
This command is used to bevel the edges of 3D solids and surfaces.
## Command Access:
> **Icon:** 
> **Menu:** /
> **Ribbon:** /
> **Toolbar:** /
> **Command:** CHAMFEREDGE
> **Alias:** /
## Command Prompts:
```
Select an edge or [Loop/Distance]:
```
## Select an Edge
Selects a single solid or surface edge to chamfer.
## Distance1
Sets the distance of the first chamfer edge from the selected edge. The default value is 1.
## Distance2
Sets the distance of the second chamfer edge from the selected edge. The default value is 1.
## Loop
Chamfers all edges on a single face. For any edge, there are two possible loops. After selecting a loop edge you are prompted to accept the current selection or choose the next loop.
## Expression
Controls the chamfer distance with a mathematical expression.
---
**Related Concepts：**
- [About Chamfers (GstarCAD 2026)](../../../2026/Commands/02%20Concepts/About%20Chamfers.md)
**Related Tasks：**
- [To Work With Chamfers (GstarCAD 2026)](../../../2026/Commands/01%20Procedures/To%20Work%20With%20Chamfers.md)
---
[Original help](https://www.gstarcad.net/help/GstarCAD_2027_en-US/detail/commandReferences_C/CHAMFEREDGE.html) · © Gstarsoft Co., Ltd.