# Viewpoint Presets Dialog Box [GstarCAD 2027](Help%20System/GSTARCAD/2027/Index.md) → [Commands](Help%20System/GSTARCAD/2027/Commands/(Commands).md) → [Dialog Boxes](Help%20System/GSTARCAD/2027/Commands/03%20Dialog%20Boxes/(Dialog%20Boxes).md) ## Function Description: This command is used to preset the viewpoint direction in 3D space.  **Dialog Box Options:** ## **Set Viewing Angles** Sets the direction of the view relative to either the world coordinate system (WCS) or a user coordinate system (UCS). ## Absolute to WCS Sets the view direction relative to the WCS. ## Relative to UCS Sets the view direction relative to the current UCS. ## From Specifies viewing angles. ## X Axis Specifies the angle from the X Axis. ## XY Plane Specifies the angle from the XY Plane. You can also use the sample image to specify viewing angles. The black arm indicates the new angle. The gray arm indicates the current angle. Specify an angle by selecting the inner region of the circle of half-circle. Selecting the bounded outer regions rounds off the angle to the value displayed in that region. If you select the inner arc or an area inside it, the angle is not rounded off and the result may be a fractional number. ## Set to Plan View Sets the viewing angles to display the plan view relative to the selected coordinate system. --- [Original help](https://www.gstarcad.net/help/GstarCAD_2027_en-US/detail/commandReferences_D/DDVPOINT_DIA.html) · © Gstarsoft Co., Ltd.