# To Offset Objects [GstarCAD 2027](Help%20System/GSTARCAD/2027/Index.md) → [Commands](Help%20System/GSTARCAD/2027/Commands/(Commands).md) → [Procedures](Help%20System/GSTARCAD/2027/Commands/01%20Procedures/(Procedures).md) **To Offset Objects by Specifying an Offset Distance** 1. Click Modify > Offset on the main menu. 2. Specify the offset distance. You can either enter a value or use the pointing device to determine a distance with two points. 3. Select an object to offset. 4. Specify a point on side to offset. **To Offset Objects by Specifying a Pass-Through Point** 1. Click Modify > Offset on the main menu. 2. Enter T (Through) at the command prompt. 3. Select the object to offset. 4. Specify the through point. --- [Original help](https://www.gstarcad.net/help/GstarCAD_2027_en-US/detail/commandReferences/To%20Offset%20Objects.html) · © Gstarsoft Co., Ltd.