# To Create Cones [GstarCAD 2027](Help%20System/GSTARCAD/2027/Index.md) → [Commands](Help%20System/GSTARCAD/2027/Commands/(Commands).md) → [Procedures](Help%20System/GSTARCAD/2027/Commands/01%20Procedures/(Procedures).md) **Create a Cone With a Circular Base** 1. Click Draw > Modeling > Cone on the main menu. 2. Specify the center point of the base. 3. Specify the radius or diameter of bottom. 4. Specify the height of the cone. **Create a Cone With an Elliptical Base** 1. Click Draw > Modeling > Cone on the main menu. 2. At the Command prompt, enter E (Elliptical). 3. Specify endpoint of first axis. 4. Specify other endpoint of first axis. 5. Specify endpoint of second axis. 6. Specify the height of the cone. **Create a Frustum of a Cone** 1. Click Draw > Modeling > Cone on the main menu. 2. Specify the center point of the base. 3. Specify the radius or diameter of bottom. 4. At the Command prompt, enter T (Top radius). Specify the top radius of the frustum face. 5. Specify the height of the cone. --- [Original help](https://www.gstarcad.net/help/GstarCAD_2027_en-US/detail/commandReferences/To%20Create%20Cones.html) · © Gstarsoft Co., Ltd.