# LOFTANG2 System Variable [GstarCAD 2026](Help%20System/GSTARCAD/2026/Index.md) → [System Variables](Help%20System/GSTARCAD/2026/System%20Variables/(System%20Variables).md) **Function Description:** The LOFTANG2 system variable is used to set the draft angle through the last cross section in the loft operation. | | | | --- | --- | | Type | Real | | Saved in | Drawing | | Initial value | 90 | | Range | 0 ~ 360 | The 0 direction is measured outward from the curve on the plane of the curve. The positive direction is measured toward the next cross section. --- [Original help](https://www.gstarcad.net/help/GstarCAD_2026_en-US/detail/systemVariables/LOFTANG2.html) · © Gstarsoft Co., Ltd.