# HPDRAWORDER System Variable [GstarCAD 2026](Help%20System/GSTARCAD/2026/Index.md) → [System Variables](Help%20System/GSTARCAD/2026/System%20Variables/(System%20Variables).md) → [H](Help%20System/GSTARCAD/2026/System%20Variables/H/(H).md) ## Function Description: The HPDRAWORDER system variable is used to control the order of hatches and fills. | | | | --- | --- | | Type | Integer | | Saved in | Not saved | | Initial value | 3 | | Range | 0,1,2,3,4 | The HPDRAWORDER system variable can control whether the hatches and fills are display in front of other objects or behind them; or display in front of associative boundary or behind them. ## System Variable Value: **0:** none, do not specify draw order for hatches and fills **1:** send to back. Send the hatches and fills back of other objects **2:** bring to front. Bring the hatches and fills in front of other objects **3:** send behind of boundary. Send the hatches and fills behind of boundary objects **4:** bring in front of boundary. Bring the hatches and fills in front of boundary objects --- [Original help](https://www.gstarcad.net/help/GstarCAD_2026_en-US/detail/systemVariables/HPDRAWORDER.html) · © Gstarsoft Co., Ltd.