# RECTANG Command
[GstarCAD 2022](Help%20System/GSTARCAD/2022/Index.md) → [Commands](Help%20System/GSTARCAD/2022/Commands/(Commands).md) → [R](Help%20System/GSTARCAD/2022/Commands/R/(R).md)
## Function Description:
This command is used to create a rectangular polyine.
Users can use this command to specify the rectangular parameters (length, width, and rotated angle) and control corner types (fillet, chamfer or right angle).
## Command Access:
> **Icon:**
> 
> **Menu:** Draw \> Rectangle
> **Ribbon:** Home \> Draw \> Rectangle
> **Toolbar:** Draw \> Rectangle
> **Command:** RECTANG
> **Alias:** REC
## Command Prompts:
Specify first corner point or
\[Chamfer/Elevation/Fillet/Thickness/Width/Oblique\]:
## **First corner point**
Specifies a corner point of the rectangle.
- **Other corner point:**
Specifies another corner point to create a rectangle.
- **Area:**
Creates a rectangle by the area and a length or a width. It can create chamfers or fillets on the rectangle by setting the
Chamfer or Fillet option.
- **Dimensions:**
Creates a rectangle by length and width.
- **Rotation:**
Creates a rectangle at a specified rotation angle.
## **Chamfer**
Specifies the chamfer distances for the rectangle.
## **Elevation**
Specifies the Z value for the rectangle. The default is 0.0.
## **Fillet**
Specifies the fillet radius for the rectangle.
## **Thickness**
Specifies the thickness of the rectangle.
## **Width**
Specifies the polyline width for the rectangle.