# SELECTIONCYCLING System Variable [GstarCAD 2021](Help%20System/GSTARCAD/2021/Index.md) → [System Variables](Help%20System/GSTARCAD/2021/System%20Variables/(System%20Variables).md) → [S](Help%20System/GSTARCAD/2021/System%20Variables/S/(S).md) ## Function Description: The SELECTIONCYCLING system variable is used to control the display option associated with overlapped objects and cycling selection. | | | | --- | --- | | Type | Integer | | Saved in | Registry | | Initial value | -2 | | Range | 0,1,2 | The SELECTIONCYCLING system variable is used to control the display option associated with overlapped objects and cycling selection. ## System Variable Value: **0:** disabled display options **1:** only display profiles **2:** display marks and selection dialog box Pressing Ctrl\+W key to switch current setting on and off. When the setting of SELECTIONCYCLING is a negative value, close cycling selection, but the setting will be stored. --- ## Other versions with matching text [GstarCAD 2016](../../../2016/System%20Variables/S/SELECTIONCYCLING%20System%20Variable.md) · [GstarCAD 2017](Help%20System/GSTARCAD/2017/System%20Variables/S/SELECTIONCYCLING%20System%20Variable.md) · [GstarCAD 2018](Help%20System/GSTARCAD/2018/System%20Variables/S/SELECTIONCYCLING%20System%20Variable.md) · [GstarCAD 2019](Help%20System/GSTARCAD/2019/System%20Variables/S/SELECTIONCYCLING%20System%20Variable.md) · [GstarCAD 2020](Help%20System/GSTARCAD/2020/System%20Variables/S/SELECTIONCYCLING%20System%20Variable.md) · [GstarCAD 2022](Help%20System/GSTARCAD/2022/System%20Variables/S/SELECTIONCYCLING%20System%20Variable.md)