# WEDGE Command
[GstarCAD 2021](Help%20System/GSTARCAD/2021/Index.md) → [Commands](Help%20System/GSTARCAD/2021/Commands/(Commands).md) → [W](Help%20System/GSTARCAD/2021/Commands/W/(W).md)
The WEDGE command is used to create 3D solid wedges.
## Command Access:
> **Ribbon:** 3D \> Modeling \> Box  Wedge
> **Menu:** Draw\> Modeling\> Wedge
> **Command:**WEDGE
## Command Prompts:
> Specify first corner of \[Center\]:
> Specify other corner or \[Cube/Length\]:
> Specify height or \[2Point\]:
## Function Description:
The incline direction is always along the positive direction of X axis in UCS.
If the Z value of the specified other corner point is different to the first specified corner point, it will not display height prompt.
When specifying height, inputting a positive value, the wedge height will be created along the positive direction of Z axis in current UCS, on the contrary, it will be along the negative direction.
Relative Glossary:
**Center:**
Specify center to create a wedge.
> **Cube:**
> Create an equilateral wedge.
>
> 
> **Length:**
> Create a wedge by its length, width and height. The length is along the X axis direction, the width is along the Y axis direction and the height is along the Z axis direction.
>
> 
**Cube:**
Create an equilateral wedge.
**Length:**
Create a wedge by its length, width and height. The length is along the X axis direction, the width is along the Y axis direction and the height is along the Z axis direction.
**2Point:**
Specify wedge height by distance between two specified points.
## Other versions with matching text
[GstarCAD 2016](../../../2016/Commands/W/WEDGE%20Command.md) · [GstarCAD 2017](../../../2017/Commands/W/WEDGE%20Command.md) · [GstarCAD 2018](Help%20System/GSTARCAD/2018/Commands/W/WEDGE%20Command.md) · [GstarCAD 2019](Help%20System/GSTARCAD/2019/Commands/W/WEDGE%20Command.md) · [GstarCAD 2020](Help%20System/GSTARCAD/2020/Commands/W/WEDGE%20Command.md)