# LINE Command [GstarCAD 2020](Help%20System/GSTARCAD/2020/Index.md) → [Commands](Help%20System/GSTARCAD/2020/Commands/(Commands).md) → [L](Help%20System/GSTARCAD/2020/Commands/L/(L).md) The LINE command is used to create lines. Command Access: > **Ribbon:** Home \> Draw \> Line > **Menu:** Draw \> Line **Command:** LINE Command Prompts: > Specify first point: > Specify next point or \[Undo\]: > Specify next point or \[Undo\]: Function Description: User could use the LINE command to create a serial of straight lines and each straight line could be edited separately.  Relative Glossary: **Continue:**After drawing a line, pressing ENTER, it will continue to draw a line from the endpoint of the latest line.  After drawing arcs, pressing ENTER, it will draw lines from the arc endpoint and specify it as the start point of new straight line; this line is tangent to the arc.   **Close:** Take the start point of the first line as the endpoint of the last line to form a closed loop segment. After drawing two or more lines, users could also use the "Close" option to form a closed loop segment.   **Undo:** Delete the recently drawn line segment. Repeatedly enter U to delete line segment by reverse sequence of drawing.   ## Other versions with matching text [GstarCAD 2016](../../../2016/Commands/L/LINE%20Command--f4f50e36f44f.md) · [GstarCAD 2017](../../../2017/Commands/L/LINE%20Command--f4f50e36f44f.md) · [GstarCAD 2018](../../../2018/Commands/L/LINE%20Command--f4f50e36f44f.md) · [GstarCAD 2019](../../../2019/Commands/L/LINE%20Command--f4f50e36f44f.md) · [GstarCAD 2021](../../../2021/Commands/L/LINE%20Command--f4f50e36f44f.md)