# Superhatch [GstarCAD 2018](Help%20System/GSTARCAD/2018/Index.md) → [User Guide](Help%20System/GSTARCAD/2018/User%20Guide/(User%20Guide).md) → [Additional Pages](Help%20System/GSTARCAD/2018/User%20Guide/Additional%20Pages/(Additional%20Pages).md) > Menu: Express\>Draw\>Superhatch > > Ribbon: Express\>Edit\> > > Command Entry: Superhatch > > The Superhatch dialog box is displayed: > >  > > Image: Accesses the Select Image dialog box to specify the image for the hatch pattern. > > Block: Opens the Superhatch\_Insert dialog box to specify the block for the hatch pattern. > > Xref Attach: Accesses the Select reference file dialog box for specifying an xref file for a hatch pattern. > > WipeOut: Selects a wipeout object as a hatch pattern. > > Select Existing: Selects an existing image, block, xref, or Wipeout as a hatch pattern. > > **For Images:** > > 1\. Open the Superhatch dialog box. > > 2\. Click the Image button, choose an image file, the Superhatch Imageraster dialog box is displayed: > >  > > 3\. Click the OK button in the Superhatch Imageraster dialog box, specify the insertion point, scale factor and angle of rotation. > > 4\. The prompt “Is the placement of this IMAGE acceptable? \[Yes/No\]\<yes\>” is displayed: > >  > > 5\. Choose a point in the rectangle and press ENTER to finish: > >  > > **For Blocks:** > > 1\. Open the Superhatch dialog box. > > 2\. Click the Block... button to access the Superhatch\_Insert dialog box: > >  > > Block: Click the Block... button to select a block in the current file: > >  > > File: Click the File... button to select a drawing file as the block. > > 3\. Select the block in the Defined Blocks dialog box and press OK. > > Note: Adjust insertion parameters on screen or deselect the check box to preset insertion parameters: > >  > > 4\. Specify the insertion point, scale factor and angle of rotation. > > 5\. The prompt “Is the placement of this IMAGE acceptable? \[Yes/No\]\<yes\>”is displayed. Choose No to Esc. If you choose Yes, GstarCAD will ask you to specify the first point: > >  > > Then GstarCAD will ask you to specify the next point: > >  > > 6\. Specify an internal point for the hatch boundary: > >  > > 7\. Press ENTER to finish the hatch: > >  > > **For WipeOut:** > > 1.Access the Superhatch dialog box and click the Wipeout button: > >  > > 2.GstarCAD will ask you to specify an insertion point to create an area that masks underlying objects > >  > > 3.Press ENTER to finish creating the boundary that masks underlying objects. > > 4.As shown in the picture, move the table to the underlying object and make a block: > >  > > 5\. As shown in the picture, move the new block to the carpet, the block will automatically cover the object under it: > >  --- Gstarsoft Co.,Ltd ## Other versions with matching text [GstarCAD 2017](../../../2017/User%20Guide/Additional%20Pages/Superhatch.md)