# Spline to Line [GstarCAD 2017](Help%20System/GSTARCAD/2017/Index.md) → [What's new](Help%20System/GSTARCAD/2017/What's%20new/(What's%20new).md) → [Additional Pages](Help%20System/GSTARCAD/2017/What's%20new/Additional%20Pages/(Additional%20Pages).md) ## Spline to Line Converts spline(s) to numbers of straight lines. **Menu:** Express tools\>Draw\> Spline to Line **Command Entry:** SPLINE2LINE Once the command is started, the command line prompts as follows: Select spline or \[Set parameters(S)\]: Select spline(s) or input “S” to set parameters \[The line precision/Starting point (S)\<1.00\>\]: Input a new value bigger than 0 to join precision between segment lines Conversion in a straight line to allow the greatest number of \<5000\>\]: Input a new value smaller than 5000 to number of lines At first, the system will fit the spline with a segment line which precision (Length) has been specified, if the line’s number needed is more than the maximum number, the system will extend the length of the lines by force, using the maximum number of lines to fit the spline. Select spline or \[Set parameters(S)\]: Then select the spline(s) to be converted and press Enter to finish the operation    --- Gstarsoft Co.,Ltd ## Other versions with matching text [GstarCAD 2018](Help%20System/GSTARCAD/2018/What's%20new/Additional%20Pages/Spline%20to%20Line.md)